The manual is embedded in the build instructions for the various Align kits. This appears to come out of the manual. At least its identical to. i have just ordered an Align 3gx flybarless control unit but i can’t find any instructions online anywhere as i like to usually download and print. Align 3Gx flybarless setup problem Electric Heli Talk. Registered User Without the 3Gx module in place, with servos connected directly to.
|Published (Last):||17 July 2011|
|PDF File Size:||17.38 Mb|
|ePub File Size:||9.76 Mb|
|Price:||Free* [*Free Regsitration Required]|
This is how to do the setup through the 3GX unit.
With 3GX in operation mode, push rudder to left or right, and press the SET button for about a second. If incorr ect movements or servo has no movement, please check servo connection to 3GX as well as radio control system.
For radio with built in gyro gain settings, gain can be adjusted directly. This completes the aileron endpoint setup process.
3GX Flybarless System – Introduction – Align
At least its identical to my manual that starts on page REV begin to flash in sequence. Note that passwords are case-sensitive.
Align 3GX version 2. The more dampening effect, the smoother helicopter flies, but feels less direct.
Align 3gx pdf manual
I thought it would work straight out of the box. Jul 25, Should there be changes such as 3GX software update, pitch reconfiguration, or subtrim adjustments, the setup process must be repeated for the flybarless system. This can only be done through actual flight tests.
Please enter a valid email address for yourself. Faster servos are able to execute commands from the gyro at faster and higher precision. Does all that stuff pictured in the link come in the kit when you get it new, or is it an aftermarket option?
After I swapped the yellow and purple wires, the servos behaved as they should. Value should be tuned under actual flight conditions by increasing to the maximum gain without tail hunting. Feb 05, I mean like if you get a e super combo new, it comes with the connection wires? There is a direct correlation between servos’ speed to gyro’s performance. Hem 3GX v 2. You mean that the 3Gx unit has to be programmed first, using the supplied CD and USB connection, before it will work properly?
Been there,, done that!
My servos are Align DS The trim must be zero when using 3GX, and should not be adjusted at anytime. In mine the section on RFS connection middle of page only says, “Care should be taken to ensure proper wire color to channel connection.
With the rudder servo centered and servo horn at 90 degrees, adjust the linkage length until tail pitch slider is centered on the tail output shaft. If that doesnt work call the vendor. Originally Posted by Tulo I mean like if you get a e super combo new, it comes with the connection wires? Originally Posted by 3ddd i just found out the manual for mine was printed wrong,if you are using futaba it shows the yellow wire going to janual 3 and the purple wire going to 6,they are backwards and need to be mznual i think this only applies to standard futaba channel mapping.
With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.
Align 3Gx flybarless setup problem – RC Groups
Sign up now to remove ads between posts. Release the button before the flash sequence complete, the DIR green LED will light up indicating the 3GX has been bypassed for mechanical neutral and travel range setup. Originally Posted by Tulo Cool, I appreciate the help! It is totally un helpful to every body to make statements of the form “When you have done this as many times as I have you will know that you disregard the manual Originally Posted by skizziks. Press the SET button manuaal enter A.
Others have confirmed to me that they’ve set up their 3Gx without using a PC, so I think mine must be faulty. manuwl
Incorrect neutral points will affect flight stability, and even lead to loss of control. And yes you remove the bind plug while still powered, it sets fail safes, throttle etc.
Plug in flight battery aalign. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. To achieve consistent gyro gain on left and right, 3GX has built in anti-torque compensation function. If not this will effect the travel of the servos Anyway, I’ll hook it up to my PC tomorrow and, hopefully, the setup program will either fix the anomoly I’m seeing, or confirm that it’s a fault.
In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic. Spektrum does make satellites but I am pretty sure they are not in any way compatible.